How to use – Eureka 4750A User Manual
Page 14
14
FIG. 10
FIG. 11
FIG. 12
(CONTINUED)
ENGLISH
How To Use
CAUTION: Do not plug in cleaner until you understand all controls
and features.
Step 1: Plug in Vacuum. (FIG. 10) Unwrap the cord by turning the quick
release cord hook (FIG. 10a), unwind the cord and plug into an
appropriate outlet. The plug has a wider prong that will only fit one way
into the receptacle. (FIG. 10b)
FIG. 11a
FIG. 10b
FIG. 10a
Step 2: Put Cord on Cord Retainer. (FIG. 11) To use, push electrical cord
down into cord retainer (FIG. 11a). You will find your cord retainer on the
handle above the upper cord hook. This will place the cord out of the way
the next time you vacuum.
Step 3: ON/OFF Switch. (FIG. 12) The ON/OFF switch is on the base.
Press once to turn on and press again to turn off.