DE DIETRICH DTI1177X - Manual (Page 11)

EN
11
- Briefly press button H to confirm. A short beep
is heard and the ”boil” display becomes fixed.
A series of beeps are heard when your water is
at boiling point and the word “boil” scrolls
across the display (b followed by o etc...)
- Put the food in (pasta, rice, etc.)
Briefly press button “H”, power level 12 or 13
and 8 min are displayed by default.
You can change the power and time using
sliders N and O.
NB: It is important that the water temperature is
neither too hot nor too cold when cooking
begins otherwise the final result will be affected.
This function can be used on all burners at the
same time.
Do not use cast iron cookware.
Do not use a lid.
Do not use salt.
• Independent timer
This function allows you to time an event,
without cooking.
- Select a cooking zone you are not using.
- Set the time with the timer slider. A “t”
flashes in the display.
- At the end of your adjustment “t” becomes
steady and the count begins.
N.B.:
You can stop a count in progress by keeping
your finger on the button of the selection on
the display.
Using a cooking zone
Adjusting the power level:
- Place your cookware on the cooking zone
and press the on/off button for the zone to
be used. A beep and a light will confirm your
selection.
- Adjust the power by sliding your finger on
the power slider to the right to increase and
to the left to decrease the power or by using
the preselected power settings.
Switching off a cooking zone
- Press your finger on the selector button
Adjusting the timer:
- Adjust the timer by sliding your finger on the
timer slider to the right to increase and to
the left to decrease the time.
- When the cooking is finished, “0” is dis-
played and a beep sounds. Press on the
selector button for the zone to delete this
information.
N.B.:
- If you slide your finger on the timer slider
from right to left you to reach directly 99
minutes.
- If you do not make a selection or if there is
no cookware, the selected zone turns off
after a few moments.
ADDITIONAL FUNCTIONS
• Boil function
This function allows you to bring water to
boiling point and keep it there for any food
requiring cooking in boiling water.
- Select a cooking zone.
- Press button H briefly. A short beep is
heard. ”2l” is displayed by default.
- Adjust the volume of water by sliding your fin-
ger on the power slider from 0.5 litres to 6 litres.
The quantity of water can be 0.5l, 1l ,1.5l, 2l,
2.5l, 3l, 4l, 5l and 6 litres.
B
A C
D
H I J K L M N O
2 / USING YOUR APPLIANCE