DE DIETRICH DFN1324i - Manual (Page 15)

13
1
Instruction manual
Very important: Please read this manual fully before using your freezer.
This manual has been designed so that the text is linked to the relevant drawings.
Installation
Identify the model of your freezer (“ a”, “b”,
“ c”) by comparing the control panel with the
illustrations.
Your freezer is a NO FROST model if NO FROST
appears on the control panel.
1.1 Unpacking. Remove all the protection.
1.2 Location. Position the freezer away from
heat sources and protected from direct
sunlight to reduce consumption.
Do not install the freezer outside or anywhere
it is exposed to rain.
Also check that the shelves have been fi tted
correctly, and place containers apart to
prevent any vibrations.
1.3 Electrical connection. Stand the freezer
upright for at least 2 hours before plugging it
in. Check that the voltage information on the
registration plate coincides with local voltage.
(1.3.1, 1.3.2).
Do not use any adapters or extension leads.
Make sure that the lead is not touching the
motor or trapped underneath it.
The plug from the socket must be accessible
after the appliance has been installed.
1.4 Climate class. This appliance is designed
for optimum operation at an ambient
temperature of +10 ºC to + 43 ºC, climate
class SN-T (1.3.2). Outside this temperature
range, the performance of the appliance may
be affected.
1.5 Size of recess. See the type of appliance
on the registration plate (1.3.1, 1.3.2) to
determine the size of the recess in (1.3.3).
0
Identifi cation
e n g l i s h
2.1 Switching on the freezer. Press the
button (2.1.1) or or turn the control (2.1.2,
2.1.3). The display
models will light
up to indicate the appliance is switched on.
2.2 Setting the temperature. Press the
, buttons (2.2.1). Turn the control
(2.2.2, 2.2.3). When you have selected the
temperature you want, the indicator lights will
show you the real temperature or you can
press the keys for 5 seconds to see this
,
(2.2.4) buttons for fi ve seconds. The
temperature will fl ash. Models do
not have this function.
Recommendation: The recommended
temperature for your freezer is ºC.
If you want to freeze, the recommended
temperature is
ºC. See 2.3. (Fast
cooling function)
Remember that the temperature inside the
freezer depends on the ambient temperature,
the location and how often the freezer door is
opened.
2.3 Freezer functions.
Fast cooling function: This function makes
the freezer work at the minimum temperature
for a maximum of 52 hours. We recommend
you use this function whenever you put large
quantities of food in the freezer. You should
activate the function 24 hours in advance. To
activate and deactivate it: Press
(2.3.1) or
(2.3.2, 2.3.3).
ECO setting: The ECO setting gives
substantial energy savings and keeps the
freezer at a stable temperature. This function
stays active even after a power cut. When
using this mode, we recommend you store
all the food on the shelves in the centre.
To activate or switch off press
(2.3.4).
Models do not have this option.
Quick cooling function: Put the bottle or
bottles into the freezer and press
for a few seconds until the icon appears
(2.3.5). The freezer will supply cold for
15 minutes, after which time the function
fi nishes, will fl ash and an alarm will sound
for 20 minutes, telling you it is time to remove
the bottle to prevent it from bursting. Disable
2
Use