Amprobe DGC-1000A Ground-Resistance-Tester - Manual (Page 5)

2
III. PANEL DESCRIPTION
HOLD
OFF
FUNC REC
1. Jaws Assembly: Enclose electrode or ground rod. No air gap is
allowed between two half jaws.
2. Hold Button: Press this button to freeze the value in LCD
3. Rotary Switch: Turn power on and select the desired function.
4. LCD
5. REC button: When one of the functions is selected by FUNC
button, it is used to increment value. If no function is selected, it is
used to start data logging, or record one data point.
6.
▼
button: To decrement value, press this button
7. Jaws Trigger
8.
▲
button: To increment value, press this button
9. FUNC button: Press this button to select function of HI (hi alarm,)
LO (low alarm), SEC (seconds), or no.(read,).