Avago Technologies LSI7104EP-LC - Manual (Page 74)

4-18 BIOS Features
Ver. 2.1 Copyright © 2005-2006 by LSI Logic Corporation. All rights reserved.
ok 1 set-topology
Topology selected is NL_Port
Topology has been set
Change will take effect after system power cycle
ok 2 set-topology
Topology selected is N_Port
Topology has been set
Change will take effect after system power cycle
ok a set-topology
Topology selected is auto
Topology has been set
Change will take effect after system power cycle
Note: The system must be power-cycled before the changes
take effect. It is not sufficient to execute the reset-all
command.