PLANET DSP-1000 - Manual (Page 92)

- 92 -
NOTE:
If you use the Manual or Standby mode and there is no 000
file, it will display a message saying “No Title Files Found”.
The same message will appear if the 000 file is not an AVI or
JPG&MP3 file.
NOTE:
Make sure that there is no more than one file with the same
file name!
4.6.4 Auto ON/OFF
Turning this function ON will allow you to set a time for the unit to
automatically turn ON and also a time for it to turn OFF again.
1. Press SETUP on your remote control to enter the DSP-1000’s
setup menu.
2. In the MISC2 category, turn on the Auto ON/OFF function.
3. Select the ON/OFF Time and enter a time for each option.
NOTE:
Make sure the NTP server is enabled and the DSP-1000 has
a connection to the internet to synchronise the time. If it can
not connect to the internet at boot up, the system time will be
off and the Auto ON/OFF function will therefore be inaccurate.