PLANET IKVM-17080 - Manual (Page 14)

8
11B
2.4 Connecting the Console
To connect an LCD console to a computer, perform the following steps
8 Port of KVM
16 Port of KVM
1.
Turn off your computer. You should always turn off your computer before connecting or
disconnecting a device.
2. Connect the video (VGA) connector of the KVM cable to the video card connector on the
rear panel of your computer.
3. Identify and connect the PS/2 mouse and PS/2 keyboard connector to the correct PS/2
ports on the rear panel of your computer. Or you can use USB interface to connect your
computer (Use PS/2-USB switch to select your interface). The switch has to be on PS/2
side when you use PS/2 interface connector.)
Please don't plug PS/2 and USB cables at the same time