PLANET IKVM-17080 - Manual (Page 58)

50B
5.5.9 USB
USB 2.0 is the default setting, if the operating system of the managed computer does
not support USB 2.0, please force it to USB 1.1.
51B
5.5.10 Config File
With this function, the configuration settings can be saved (Backup) in a file (config.gz),
or reloaded (Restore) from a previously saved configuration file.
23B
5.6 Maintenance
The administrator performs various maintenance activities on the IP-KVM. These
include viewing its status, update firmware, view the event log and reset the unit
52B
5.6.1 Device Information
The Device Status page contains a table with information about the IP-KVM’s hardware
and firmware. This information is useful if technical support is required.
52