ProSoft Technology MVI71-DNP User Manual
Page 112
Advertising
MVI71-DNP ♦ PLC Platform
Reference
DNP 3.0 Master/Slave Communication Module
Page 112 of 172
ProSoft Technology, Inc.
August 23, 2007
2
Make sure that you are not actively browsing using the driver that you wish to
stop. The following shows an actively browsed network:
3
Notice how the DF1 driver is opened, and the driver is looking for a processor
on node 1. If the network is being browsed, then you will not be able to stop
this driver. To stop the driver your RSWho screen should look like this:
Branches are displayed or hidden by clicking on the or the icons.
4
When you have verified that the driver is not being browsed, go to
Communications>Configure Drivers
You may see something like this:
Advertising