ProSoft Technology 5204-DFNT-PDPMV1 - Manual (Page 22)

Functional Overview DFNT ♦ ProLinx Gateway
Protocol Manual EtherNet/IP Explicit Messaging Client/Server
Page 22 of 124 ProSoft Technology, Inc.
July 24, 2013
Before attempting to use the module on a network, verify that the DFNT module
is correctly configured and connected to the network. A network program such as
PING can be utilized to make certain the module can be seen on the network.
Use ProSoft Configuration Builder to verify correct operation, and to transfer
configuration files to and from the module.
2.3.1 EtherNet/IP Explicit Messaging Server Command Support
The current version of the module will respond to the following list of commands.
Future releases may support more functions as required by user applications.
2.3.2 Basic Command Set Functions
Command Function Definition Supported in Server
0x00 N/A Protected Write X
0x01 N/A Unprotected Read X
0x02 N/A Protected Bit Write X
0x05 N/A Unprotected Bit Write X
0x08 N/A Unprotected Write X
2.3.3 PLC-5 Command Set Functions
Command Function Definition Supported in Server
0x0F 0x00 Word Range Write (Binary Address) X
0x0F 0x01 Word Range Read (Binary Address) X
0x0F Typed Range Read (Binary Address) X
0x0F Typed Range Write (Binary Address) X
0x0F 0x26 Read-Modify-Write (Binary Address)
0x0F 0x00 Word Range Write (ASCII Address) X
0x0F 0x01 Word Range Read (ASCII Address) X
0x0F 0x26 Read-Modify-Write (ASCII Address)
2.3.4 SLC-500 Command Set Functions
Command Function Definition Supported in Server
0x0F 0xA1 Protected Typed Logical Read With Two
Address Fields X
0x0F 0xA2 Protected Typed Logical Read With Three
Address Fields X
0x0F 0xA9 Protected Typed Logical Write With Two
Address Fields X
0x0F 0xAA Protected Typed Logical Write With Three
Address Fields X
0x0F 0xAB Protected Typed Logical Write With Mask (Three Address Fields)