ProSoft Technology 5204-DFNT-PDPMV1 User Manual
Page 45
DFNT ♦ ProLinx Gateway
Configuring the Gateway
EtherNet/IP Explicit Messaging Client/Server
Protocol Manual
ProSoft Technology, Inc.
Page 45 of 124
July 24, 2013
3.6.1 Moving Data
The following illustration shows an example Data Map. The Data Map allows you
to move data to different addresses within the module database in order to create
simpler data requests and control.
3.6.2 From Address
0 to highest Status Data address
This field specifies the beginning internal database register address for the copy
operation. This address can be any valid address in the User Data Area or the
Status Data Area of the gateway.
3.6.3 To Address
0 to 3999
This parameter specifies the beginning destination register address for the copy
operation. This address must always be within the User Data registers area.
Take care to specify a destination address that will not overwrite data that has
been stored in memory by one of the communication protocols running on the
gateway.
3.6.4 Register Count
1 to 100
This parameter specifies the number of registers to copy.
3.6.5 Swap Code
N
O
C
HANGE
, W
ORD
S
WAP
, W
ORD AND
B
YTE
S
WAP
, B
YTE
S
WAP