ProSoft Technology 5204SE-MNET-PDPMV1 - Manual (Page 160)

5204SE-MNET-PDPMV1 ♦ ProLinx Gateway Reference
Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master User Manual
Page 160 of 235
ProSoft Technology, Inc.
December 22, 2009
MNETDPV1_SLVDIAG Variables - Quantum
This variable structure is a collection of six-byte arrays. Each array element holds
the six bytes of standard PROFIBUS slave data reported to the PROFIBUS
Master from each slave that exists on the network as part of the regular cyclic
data polling scheme. The array element number corresponds to the node
address of each slave.
The PB_SlaveDiagnostic DFB will automatically populate these variables with the
diagnostic data returned by the Modbus TCP/IP command. The %MW addresses
shown are for illustration only. If you decide to use these variables, your
application may require that you map them to addresses other than the ones
shown here. You may assign these variables to any valid %MW addresses that
exist in your processor configuration.