ProSoft Technology 5204SE-MNET-PDPMV1 - Manual (Page 39)

Procedures 5204SE-MNET-PDPMV1 ♦ ProLinx Gateway
User Manual Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master
ProSoft Technology, Inc.
Page 39 of 235
December 22, 2009
3.4.4 Configure the MNET Client (Optional)
MNET Client Commands can affect the data contained in any of the gateway's
4000-register internal memory database. Be aware that the processor logic will
also be reading from and writing to the PROFIBUS areas of the gateway's
memory through the MNET Servers. If you decide to use Client commands in
your application, be careful that you do not interfere with or overwrite data in the
PROFIBUS areas of the gateway unless your application requires it. For more
details on gateway memory areas, see Memory Maps (page 30).
Warning: Inadvertant overwriting of data in the PROFIBUS memory areas could cause
unexpected behavior on your PROFIBUS DP network, leading to unintended equipment operation.
Such unintended operation could cause injury to personnel or damage to equipment.
Refer to the MNET Driver Manual, on the ProLinx Solutions CD-ROM, for more
information about the MNET Client, its functions and capabilities.