ProSoft Technology 5204SE-MNET-PDPMV1 User Manual
Page 31
Procedures 5204SE-MNET-PDPMV1
♦ ProLinx Gateway
User Manual
Modbus TCP/IP to PROFIBUS DP-V1 Pass-Through Master
ProSoft Technology, Inc.
Page 31 of 235
December 22, 2009
This action opens Unity Passthru Memory Map window.
2 Notice that there are two radio buttons in the Display area of the dialog box to
select Inputs or Outputs. These Input and Output maps correspond to the
Input and Output data you configured for the PROFIBUS Slaves (page 25).
Notice also that there are check boxes to display
S
LOT
N
UMBERS
and
PROFIBUS
A
DDRESSES
.
3 Click P
RINT
to print the maps for reference. Note that you must do this once
for the input map and once for the output map. Use the Display area radio
buttons to select which map you wish to print.
4 When you have finished printing the ProLinx memory maps, click OK
to close
the dialog box. Click OK
again to close the Master Setup dialog box.