Paper doesn't feed correctly, Lancaster dos rev.c – Epson 900 User Manual

Page 18

Advertising
background image

18

Lancaster DOS
Rev.C

A5 size

DOS.FM

2/5/99

Pass 3

L

Proof Sign-off:
Yano

_______

Nomoto

_______

K.Pipa

_______

One of the ink out lights is flashing or on

If the

B black or

A color ink out light is flashing, ink is low.

Prepare a replacement cartridge.

If the

B black or

A color light is on, ink is out. Replace the

corresponding cartridge. See “Replacing Ink Cartridges” in your
Setup & Daily Use manual.

Ink out lights are on and the other lights are flashing

Follow these steps.

1. Remove any paper in the printer.

2. Turn the printer off. Check for and remove any foreign objects

or pieces of paper from inside the printer. Also, make sure

that there is sufficient space around the vent on the back of
the printer allowing for proper ventilation. Remove any
objects blocking the vent. Then turn the printer back on.

3. If the error is not cleared, contact your dealer.

Paper doesn't feed correctly

If any of the following problems have occurred, see the solutions
below.

Paper doesn't feed

Remove the stack of paper and check that:

The paper isn’t curled or creased.

The paper isn’t too old. See the instructions that came with the
paper for more information.

The paper isn’t loaded above the arrow on the left edge guide.

The paper isn’t jammed inside. If it is, remove the jammed paper.

Advertising