Character tables, Lancaster dos rev.c – Epson 900 User Manual
Page 28
Advertising
28
Lancaster DOS
Rev.C
A5 size
DOS.FM
2/5/99
Pass 3
L
Proof Sign-off:
Yano
_______
Nomoto
_______
K.Pipa
_______
Character Tables
These character tables are selected with the default-setting mode or
by using software commands.
All tables except the italic character table are the same as the PC437
table for hex codes 00 through 7F, so only the PC437 table is shown
in its entirety. The rest of the tables show only the characters for hex
codes 80 through FF.
The tables with an asterisk (*) after the table name are only available
in certain areas.
PC437 (U.S./Standard Europe)
Advertising