Epson 900 - Manual (Page 5)

5
Lancaster DOS
Rev.C
A5 size DOS.FM
2/5/99 Pass 3
R Proof Sign-off:
Yano
_______
Nomoto _______
K.Pipa _______
For more details, see the next section, “Using the default settings”.
To change a setting, see “Changing the default settings” on page 8.
Note:
Most software controls the character table and auto line feed. If your
software controls these features, you may never need to set them with the
control panel.
Using the default settings
Print direction
Your printer has three direction settings: Auto, Bi-D, and Uni-D.
Auto causes the printer to switch automatically between
bidirectional (for text data) and unidirectional (for graphics data).
Bi-D causes the print heads to print in both directions. This provides
the fastest printing. Uni-D causes the print heads to print in one
direction only. This provides maximum alignment for both graphics
and character printing.
Note:
Most software controls this setting. If your software does, you may never
need to set it with the control panel.
Font
Use this setting to select the default font.
Pitch
With this setting, you can specify the default character pitch (font
size).