Epson 900 - Manual (Page 27)

27
Lancaster DOS
Rev.C
A5 size DOS.FM
2/5/99 Pass 3
R Proof Sign-off:
Yano
_______
Nomoto _______
K.Pipa _______
Transporting the printer
If you need to transport your printer a significant distance, carefully
repack it using the original box and packing materials as follows:
1. Open the printer cover and make sure that the print head is in
the home (far right) position. If not, turn on the printer and wait
until the print head returns to the home position. Then turn off
the printer and close the printer cover.
c Caution:
Leave the ink cartridges installed during transportation,
otherwise the printer may be damaged.
2. Unplug the power cord from the electrical outlet; then disconnect
the interface cable from the printer.
3. Remove the paper from the sheet feeder and remove the paper
support.
4. Push in the output extension tray, and then raise the output tray.
5. Open the printer cover again. Secure the ink cartridge holder to
the printer with tape as shown below, then close the printer
cover.
6. Attach the protective materials to both sides of the printer.
7. Repack the printer and power cord in the original box.
8. Keep the printer level during transport.