Datalogic QuickScan Lite QW2100 - Manual (Page 70)

Keyboard Interface
60 QuickScan TM Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Wedge Quiet Interval
This option specifies the amount of time to look for keyboard activity before the reader breaks
the keyboard connection in order to transmit data to host. The selectable range for this feature is
from 0 to 990ms in 10ms increments. See
Wedge Quiet Interval on page 257 for more
detailed programming instructions.
NOTE
This feature applies ONLY to the Keyboard Wedge interface.
$CKBQI
Select Wedge Quiet Interval Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT 10 = Quiet Interval of 100 ms