Sony CMT-X3CD - Manual (Page 27)

27 GB
T
roub
leshoot
in
g
Messages
The following messages may appear or
flash during operation.
DISC ERR
You have set a disc that cannot be played
back on this system, such as CD-ROM, or
tried to play an unplayable file.
COMPLETE
The station preset operation ended
normally.
FULL
You tried to program more than 64 tracks or
files.
LOCKED
The disc slot lock feature is activated.
NO USB
No USB device is connected, the connected
USB device has been removed, or the
system does not support the USB device.
NO DISC
There is no disc in the player, or you have
set a disc that cannot be loaded.
NO STEP
There is no steps have been registered or all
of the programmed tracks have been
erased.
NO FILE
There are not playable files on the USB
device or disc.
OVER CURRENT
The system detects an overcurrent in a
connected USB device. Remove the USB
device from the port and turn off the system
then turn on the system.
PLS STOP
You attempted to change the play mode
during playback in the CD or USB function.
READING
The system is reading the information on
the CD. Some buttons do not work during
reading.
SEARCH
The system is searching the information on
the USB device. Some buttons do not work
during searching.
TIME NG
The Play Timer start and end times are set to
the same time.