Yamaha CVP-705B User Manual
Page 101
CVP-709/CVP-705 Owner’s Manual
101
M
enu
D
is
pl
ay
Fu
n
ct
io
n
Li
st
Song Creator
Lets you create a Song by editing an existing recorded Song.
–
Voice
Setting
Tune
For adjusting the pitch for each keyboard part (Main/Layer/Left).
–
Piano
For editing the parameters of the piano Voices, including the VRM Voices.
Voice Set
Determines which settings (effects, etc.) linked to the Voices are not called
up when selecting a Voice.
Setting
Determines how the Voice Selection display is opened when one of the
VOICE category buttons is pressed. Also determines whether to add
articulation effects or not when selecting an S.Art2 Voice (CVP-709 only).
Style
Setting
Setting
For editing parameters for Style playback such as Stop Accompaniment
and OTS Link Timing.
–
Change
Behavior
Determines the Style condition (sections, tempo, etc.) when selecting a
different Style.
Song
Setting
Guide
For selecting the type of the Guide function, or changes the guide lamp
settings.
–
Part Ch
Determines which MIDI channel in the Song data is used for the right-hand/
left-hand part.
Lyrics
Determines the language of the displayed lyrics.
Play
For editing parameters for Song playback such as Repeat Playback and the
Performance Assistant Technology.
Rec
For editing parameters for re-recording of MIDI Songs, or setting the file
format for Audio recording.
Tuning
Master Tune
For fine-tuning the pitch of the entire instrument in approx. 0.2 Hz steps.
–
Scale Tune
For selecting the scale type and tuning the pitch of the desired note (key) in
cents.
Keyboard Setting
Determines the Touch Response of the keyboard, or turns the Left Hold
function on/off.
Metronome
Setting
Metronome
Determines the metronome volume, sound and time signature.
–
Tap Tempo
Determines the volume and sound type of the sound caused when the [TAP
TEMPO] button is pressed.
MIDI Setting
System
For editing the parameters for MIDI system messages.
–
Transmit
For editing the parameters for MIDI transmission.
Receive
For editing the parameters for MIDI reception.
On Bass Note
Determines the bass note for Style playback based on the note messages
received via MIDI.
Chord Detect
Determines the chord type for Style playback based on the note messages
received via MIDI.
Utility
Speaker/
Connectivity
For making the settings for the instrument’s speakers and the external
monitor.
Display/
Touch Screen
For editing the parameters for the display settings, such as the theme of the
home display, brightness, and touch panel calibration.
–
Parameter Lock
Determines which parameters (effect, Split Point, etc.) will not be changed
when the panel setups are changed via Registration Memory.
USB Flash Drive
Indicates the capacity of the connected USB flash drive or allows you to
format it.
System
Indicates the firmware version of this instrument, and lets you make basic
settings, such as the language for the display and voice guide.
Factory Reset/
Backup
For initializing the instrument to the factory default, or backing up the data
stored in the instrument.
Wireless LAN Settings*
For making settings for connecting the instrument to a smart device such as
iPad via a USB wireless LAN adaptor.
–
Time*
For making settings of the time shown on the display.
–
Menu
Description
Pages
* These icons appear only when the USB wireless LAN adaptor (if included) has been connected once.