MIDEA MAP08R1CWT - Manual (Page 7)

Oper
ating
Ins
tructions
Control Panel Features
Mode button
Selects the desired operating mode.
Each time you press the button, a mode
is selected in a sequence that goes from
COOL, FAN and DRY. The mode light
illuminates and indicates the selected
mode.
Up (+) and Down (-) buttons
Used to adjust (increasing/decreasing)
temperature settings in 1°C/1°F increments
in a range of 17°C/62°F to 30°C/86°F.
NOTE
The control is capable of displaying
temperature in degrees Fahrenheit or
degrees Celsius. To convert from one
to the other, press and hold the up
and down buttons at the same time
for 3 seconds.
NOTE
On above modes, the unit operates the
auto fan speed automatically. You can
set fan speed only by the remote
control on COOL and FAN modes.
Power button
Power switch on/off.
Power
indicator light
Timer mode indicator
light (set only by
remote control)
LED display
em erat e
e
oom
NOTE
When one of the above malfunctions
occurs, turn off the unit and check for
any obstructions. Restart the nit. If the
malfunction persists, turn off the unit
and unplug the power cord.
E1 om r
E2 r
E3 r
E4 r
P1
Operating Instructions
Page 7
CONSTANT FAN(Press 3s)
Constant fan