Xiaomi Robot Vacuum S10 - Manual (Page 11)

10
CAUTIONS:
Do not rinse or soak the 2-in-1 dust compartment with water tank.
Regularly clean the 2-in-1 dust compartment with water tank to prevent dirt
buildup. This will help maintain optimal performance.
Note: The filter can be rinsed with water. Make sure it is completely dry before
reinstalling. Frequent rinses are not recommended.
1. Remove the 2-in-1 dust compartment with water tank and remove the
filter.
2. Remove any debris and clean the 2-in-1 dust compartment with water
tank with the cleaning brush.
3. Clean the filter with the cleaning brush.
2-in-1 Dust Compartment with Water Tank and Filter
Care & Maintenance
Note:
Pausing
When the robot vacuum is working, pause it first then remove the 2-in-1
dust compartment with water tank to add water or clean the mop pad.
Then reinstall the 2-in-1 dust compartment with water tank and press the
to resume the task.
Adding Water or Cleaning the Mop Pad
dock to charge.
When the robot vacuum is in standby mode and not connected to the
robot vacuum will automatically return to the dock to charge.
Docking & Charging
In the do not disturb (DND) mode, the robot vacuum does not resume
cleanup, perform scheduled cleanups or play voice prompts, and the
enabled or disabled in the app.
Note: Please refer to the app for more features, including Clean There, Resume
Cleanup, Scheduled Cleanup, and Virtual Walls.
DND mode
Notes:
When using the robot vacuum for the first time, please follow the in-app prompts to
complete quick map creation. To ensure accurate mapping, it is recommended to
follow the robot vacuum and remove any obstacles on the ground when it is creating
the map. Make sure the robot vacuum starts from the charging dock.
If the robot vacuum may get stuck or scratch the surface of the furniture in some
areas, you can set restricted areas in the app to prevent the robot vacuum from
entering those areas.