Xiaomi Smart Blender - Manual (Page 10)

09
After placing the jar on the base, return
to the menu screen, and press the
cancel button to enter standby mode.
The blender will return to normal when the
temperature drops. Press the cancel
button to enter standby mode.
E02
Contact the after-sale service team.
E05
E10
Contact the after-sale service team. E11
Place the jar
Overheated
Temperature
sensor error
Communication
error
No jar placed on the
base
High temperature alert
from bottom
temperature sensor
Bottom temperature
sensor has a short or
broken circuit.
Power board and
display panel
communication error
Error Codes
Clean out the food in the jar after the
power is off, and wait for the blender
to cool down before powering it on again.
Motor overloaded
Code
Motor overloaded E01
Message Explanation Solution
Troubleshooting
Issues
Food overflows
Burnt food on the
jar's bottom
Ingredients cannot
be blended.
Ingredients not hot
after cooking
Add a proper amount of ingredients.
Add water to the proper water level.
Select the desired function according to the user manual.
Contact the after-sale service team.
Add a proper amount of ingredients.
Do not add ingredients that are easily burnt on the jar's bottom,
like flour.
Add water to the proper water level.
Clean before use.
Select the desired function according to the user manual.
Contact the after-sale service team.
Select the desired function according to the user manual.
Contact the after-sale service team.
Display does not light
up.
Check the power cord and make sure it is plugged in and connected to
the power supply.
Contact the after-sale service team.
The display is on but
the blender is not
working.
Re-select the function and press the knob to enable it.
Add water to the proper water level and restart the blender after it
cools down.
Unplug first, then power on and follow the normal operation steps.
Contact the after-sale service team.
Solutions