Xiaomi Smart Blender - Manual (Page 8)

07
Smoothie
Fruit &
vegetable juice
Milkshake
Note 1: Task scheduling is not available. The cooking task will be automatically canceled if you do
not resume it after pausing it for one minute while in the middle of its operation.
Note 2: After a task starts, press the knob to pause it and press the knob again to resume it. When it
is paused, press the cancel button to exit the task.
Turn the knob to select Smoothie, Fruit & vegetable juice, or Milkshake, then press
the knob to start making the chosen drink.
Functions
Modes
Jam
Smooth soup
Chunky soup
Soy milk
Operations
Once the blender is powered on, the knob will display "Jam". Press the knob to make
jam, or turn the knob to choose between smooth soup or chunky soup and then
press the knob to begin making the chosen one.
Note 1: Task scheduling is available, and the keep warm mode will be enabled by default once cooking
ends. The cooking task will be automatically canceled if you do not resume it after pausing it
for two minutes while in the middle of its operation.
Note 2: After a task starts, press the knob to pause it and press the knob again to resume it. When it
is paused, press the cancel button to exit the task.
Watch out for burns from residual heat. Please wait for the jar to cool down before cleaning.
Once the jar has cooled down and is empty, please add clean water and run the Press & hold to clean
mode several times to properly clean the jar.
The exterior of the base can be wiped down with a damp cloth once the power is disconnected. Do
not soak the base, jar, power cord, and other parts with electronics. Do not directly rinse the base or
other parts that contain electronics, such as the bottom of the jar.
Please rinse the jar's interior and accessories with clean water before wiping them dry. The blades
are sharp, so please be careful when cleaning to avoid injury.
Do not use abrasive cleaners or corrosive liquids (gasoline, acetone, etc.) to clean the blender.
When parts are stained with fruit or vegetable juice, wiping these parts with several drops of cooking
oil before cleaning can help remove stains more easily. Thoroughly dry the parts after rinsing them
with clean water.
If the residue in the jar forms a hard spot that is difficult to remove, please add an appropriate amount
of water to soak it before cleaning and wiping the blender dry.
If the inner bottom of the jar is not cleaned up even after multiple cleanings, and a residual layer
has adhered to it, soak it in clean water for a period of time before gently wiping it clean with a cloth
dipped in white vinegar. Please mind the blade while wiping to avoid any accidents. (Do not power
on the blender when cleaning.)
The blender should be used frequently to keep the motor dry.
If the blender will not be used for an extended period of time, please store it in a well-ventilated and
dry place to prevent the motor from getting wet and affecting its future use.
Care & Maintenance
Cleaning