Xiaomi Smart Blender - Manual (Page 11)

Notes:
· Please check whether the power cord is properly connected and the jar and the lid are properly placed. Immediately
unplug and stop using it if the blender emits strange noises, smells, smoke, etc.
· When the blender still does not work as expected after the inspection mentioned above, please contact the after-sale
service team.
Operating noise
The blender will make some sounds while it is working, which is normal.
Contact the after-sale service team.
Specifications
Name: Smart Blender Model: MPBJ001ACM-1A
Blending Power: 1000 W Heating Power: 800–950 W
Hot Drink Max. Capacity: 1200 ml
Item Dimensions: 188 Ч 222 Ч 436 mm
Wireless Connectivity: Wi-Fi IEEE 802.11b/g/n 2.4 GHz
BLE GFSK 1 Mbps
Cold Drink Max. Capacity: 1600 ml
Transmit Frequency: 2.4–2.4835 GHz Transmit Power: ≤20 dBm
Rated Voltage: 220–240 V~ Rated Frequency: 50–60 Hz
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Guangdong Chunmi Electronic Technology Co., Ltd.
Address: 2/F, Building C, South No.1 Huanzheng East Road, Beijiao Community, Beijiao Town,
Shunde District, 528311 Foshan City, Guangdong Province, PEOPLE ' S REPUBLIC OF CHINA
For further information, please go to www.mi.com
User Manual Version: V1.0
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in
directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you
should protect human health and the environment by handing over your waste equipment to a
designated collection point for the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health. Please
contact the installer or local authorities for more information about the location as well as
terms and conditions of such collection points.
Hereby, Guangdong Chunmi Electronic Technology Co., Ltd. declares that the radio equipment
type Smart blender MPBJ001ACM-1A is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration. html.
For detailed e-manual, please go to www.mi.com/global/service/userguide.
10
When performing the RE test of EN 301 489-1, the product should be tested in the standby state.
When performing tests in the 30 MHz-1 GHz band in EN 55014-1, the disturbance power should be used.