About the power supply, Battery operation, Ac adaptor operation – Roland CUBE Street EX Battery-Powered Stereo Amplifier User Manual

Page 4: Choosing batteries, Installing batteries, Removing the battery case, Checking the remaining battery amount, Operating time, Battery indicator

Advertising
background image

4

About the Power Supply

Battery Operation

The CUBE Street EX can be powered with eight AA batteries (sold

separately). We recommend that you keep batteries installed in the

unit even though you’ll be powering it with the AC adaptor. That way,

you’ll be able to continue a performance even if the cord of the AC

adaptor gets accidently disconnected from the unit.

* If you handle batteries improperly, you risk explosion and fluid leakage.

Make sure that you carefully observe all of the items related to batteries

that are listed in “USING THE UNIT SAFELY” (p. 2) and “IMPORTANT NOTES”

(p. 3).

* When operating on battery power only, the unit’s indicator will become

blink when battery power gets too low. Replace the battery as soon as

possible.

Choosing Batteries

This unit can be used with alkaline batteries or rechargeable Ni-MH

batteries. The operating time will depend on the characteristics of

the batteries. Refer to the following table and choose the type of

batteries that you want to use.

Operating time

The operating time on batteries will depend on the

type of batteries and on the setting of the [OUTPUT

POWER] switch.

Type of battery

OUTPUT POWER

switch

Operating time

Rechargeable Ni-MH

battery

MAX

Approx. 5 hours

NORMAL

Approx. 10 hours

ECO

Approx. 20 hours

Alkaline battery

MAX

Approx. 4 hours

NORMAL

Approx. 8 hours

ECO

Approx. 16 hours

* The times given in the table are approximate, and will differ depending on

the conditions of use.

Installing Batteries

Remove the battery cover.

2

Insert the batteries, taking

care to orient them as shown

in the illustration.

3

Loosen the two screws.

1

Removing the Battery Case

Although you can replace the batteries while the battery case is still

attached, it’s easier to replace the batteries if you remove the battery

case.

Loosen the two screws.

Remove the battery

case.

1

2

Checking the Remaining Battery Amount

When the [BATTERY CHECK/MUTE] switched on, you

can check the amount of power remaining in the

batteries.

* When the [BATTERY CHECK/MUTE] switched on, the

indicator blinks, and sound will not produced from the

CUBE Street EX’s speakers or from LINE OUT jacks and PHONES jack.

* Sounds may distort easily or may cut off when played at high volume as

the battery power begins to fade, but this is normal and does not indicate

a malfunction. In such instances, either replace the batteries or use the AC

adaptor included with the unit.

Battery indicator

* The remaining battery power

indication is only an approximation.

Light
Blink
Light out

Full charge

Low charge

AC Adaptor Operation

Use only the AC adaptor included with the CUBE Street EX. Use of

other AC adaptors may damage the amp or result in other problems.

Advertising