Ar299m receiver features rear panel – Samson Concert 288m Presentation Dual-Channel Wireless Lavalier & Headset Microphone System (D: 542 to 566 MHz) User Manual
Page 6
Advertising
6
1.
DC Input -
Connect the supplied power adapter here.
WARNING: Do not substitute any other kind of power adapter. Doing so can cause severe
damage to the AR299m and will void your warranty.
2.
MIX OUTPUTS -
Use these unbalanced 1/4” and 1/8” jacks when connecting the AR299m
to consumer (-10 dBV) audio equipment. Both jacks carry a combined signal of CH1 &
CH2. Wiring is as follows: tip hot, sleeve ground.
3.
CH 1 & CH 2 XLR OUTPUTS -
Use these electronically balanced low impedance (600 Ohm)
XLR jacks when connecting the AR299m to professional (+4 dBu) audio equipment. Pin
wiring is as follows: Pin 1 ground, Pin 2 high (hot), and Pin 3 low (cold).
AR299m Receiver Features Rear Panel
1
2
2
3
3
Advertising