Sony ECM-M1 Compact Camera-Mount Digital Shotgun Microphone User Manual
Page 30
HVL-F60RM2: When the batteries are running out of power, not only does a warning for the battery power appear on the LCD panel, but
the TEST button on the back of this flash unit flashes in orange. The illustration used below is of the HVL-F60RM2 flash unit.
When flashing slowly
The batteries are running out of power. It is recommended that you replace the batteries.
The flash unit, however, is still capable of firing flashes in this state.
When flashing quickly
The flash unit is not capable of firing flashes. Replace the batteries.
Notes on continuous flashes
If this flash unit fires in succession for a short period of time, its built-in safety circuit will be triggered to limit flash firing. On the LCD panel,
/ is displayed and the flash interval may be forced to extend.
In addition, if the temperature inside the flash unit rises further,
(overheat indicator) will light on the LCD panel to indicate that flash firing
is disabled for a while. In such a case, turn off the power switch on the flash unit and leave the flash unit unused for about 20 minutes to let
it cool down.
Continuous flashes heat up the batteries inside the flash unit. Take extra care when you remove the batteries.
Related Topic
4-735-263-12(1) Copyright 2018 Sony Corporation
30