Sony ECM-M1 Compact Camera-Mount Digital Shotgun Microphone - Manual (Page 62)

Help Guide
Flash
HVL-F60RM/HVL-F60RM2/HVL-F46RM
Using the LED light for video shooting (HVL-F60RM)
You can use the LED light of this flash unit as a light source for video shooting. It helps create natural lights and shadows in an environment
with poor lighting, such as indoors, to add more 3D effects to video.
Note
While the LED light on the flash unit is lit, the flash mode indicator ( ) is not displayed on the camera (i.e. the camera flash is disabled).
Depending on the camera, lens, and brightness settings for video shooting, the proper white balance may not be obtained. In such a case, adjust the
balance on the camera.
Depending on the size of the lens attached to the camera, the LED beam may be obstructed by the lens end.
4-735-263-12(1) Copyright 2018 Sony Corporation
Press the MENU button ( ) and select [LIGHT MODE]. 1
Press the center button to turn on the LED light.
To turn it off, press the center button once again.
2
Adjust LED brightness with the control wheel.
To finish video shooting with the LED light, press the MENU button.
3
62