Sony ECM-M1 Compact Camera-Mount Digital Shotgun Microphone User Manual
Page 50
Flash
HVL-F60RM/HVL-F60RM2/HVL-F46RM
Multiple wireless flash photography <group flash photography>
You can perform wireless flash photography among a maximum of 5 wireless groups of flash units including the commander unit. Before you
perform multiple wireless flash photography, be sure to specify the flash unit as the commander unit or the receiver unit.
Commander unit: HVL-F60RM/HVL-F60RM2/HVL-F46RM or a radio wireless commander
Receiver unit (off-camera flash unit): HVL-F60RM/HVL-F60RM2/HVL-F46RM or a wireless receiver
Hint
You can specify [TTL], [MANUAL], or [OFF] for the flash mode of the wireless groups A, B, and C. For the wireless groups D and E, on the other hand, you
can specify either [MANUAL] or [OFF]. The flash units in the wireless group with the flash mode specified as [OFF] do not fire.
HVL-F60RM/HVL-F60RM2: While [ON] is selected for [TTL LEVEL MEMORY] (TTL level memory function), the flash power level measured during TTL
flash photography is automatically used as the flash power level for each wireless group (A/B/C) during manual flash photography.
The commander unit fires as a member of the wireless group A. If you do not want the commander unit to fire, select
(CMD flash setting) on the Quick
Navi screen and select [OFF].
HVL-F60RM/HVL-F60RM2: You can specify a collective flash compensation level to make the flash compensation/flash power level setting for all the
groups.
Related Topic
Pairing with a radio wireless commander/receiver <for radio wireless flash photography>
4-735-263-12(1) Copyright 2018 Sony Corporation
Press the MODE button and select [GROUP] on the screen for flash mode selection.
1
Specify the flash mode, the flash compensation, and the flash power level for the wireless groups A, B, C, D, and E on the Quick
Navi screen for GROUP flash mode setting.
2
Collective flash compensation (HVL-F60RM/HVL-F60RM2)
1.
Flash mode setting
2.
Flash compensation/flash power level setting
3.
50