Epson WorkForce Pro WF-6090 Printer with PCL/PostScript User Manual
Page 177
Related topics
Replacing Ink Cartridges and Maintenance Boxes
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1.
Load a few sheets of plain paper in the product.
2.
Press the arrow buttons to select
Menu
and press the
OK
button.
3.
Select
Maintenance
and press the
OK
button.
4.
Select
Print Head Cleaning
and press the
OK
button.
You see this screen:
5.
Press the up arrow button.
Note:
Use the nozzle check pattern to determine which colors need cleaning. You can save ink by
cleaning only selected colors.
When the cleaning cycle is finished, you see a message on the screen.
Caution:
Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
6.
Select
Print Nozzle Check Pattern
and press the
OK
button.
7.
Press the up arrow button.
8.
Select
Finish
and press the
OK
button to confirm that the print head is clean.
177