Solving setup problems – Epson WorkForce Pro WF-6090 Printer with PCL/PostScript User Manual
Page 191
Note:
This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1.
Press the arrow buttons to select
Menu
and press the
OK
button.
2.
Select
System Administration
and press the
OK
button. Enter the administrator password, if
necessary.
3.
Select
Restore Default Settings
and press the
OK
button.
You see this screen:
4.
Select one of these options and press the
OK
button:
•
Network Settings
: Resets all network settings.
•
Clear All Data and Settings
: Resets all control panel settings.
You see a confirmation screen.
5.
Press the up arrow button to reset the selected settings. (Press the down arrow button if you want to
cancel the operation.)
Parent topic:
Solving Setup Problems
Check these sections if you have problems while setting up your product.
Product Does Not Turn On or Off
Noise After Ink Installation
Software Installation Problems
Parent topic:
191