Epson SureLab D1070 Professional Minilab Printer - Manual (Page 123)

SL-D1000 Series User's Guide
Control Panel Menu
123
Wi-Fi Direct Directly connect smart devices to the printer using a wireless LAN. Select
the connection method and follow the on-screen instructions to do the
settings.
The following shows details of the setting items.
Change Network Name:
Change the connection name (SSID) of the Wi-Fi Direct (simple AP)
connected to the printer to any value. The connection name (SSID) can
be set using the characters on the keyboard displayed on the control
panel screen. Input up to 22 characters.
If the connection name (SSID) is changed, then all the connected devices
will be cut off. If you change the connection name, then reconnect to
connected devices using the new connection name (SSID).
Change Password:
Change the password of the Wi-Fi Direct (simple AP) connected to the
printer. The password can be set using the ASCII characters on the soft
keyboard displayed on the control panel. Input from 8 to 22 characters.
If the password is changed, then all the connected devices will be cut off.
If you change the password, then reconnect to connected devices using
the new password.
Disable Wi-Fi Direct:
Disable the Wi-Fi Direct (simple AP) connection. If this is disabled, then all
the connected devices will be cut off.
Change Frequency Range:
This setting may not be visible, depending on your region.
Change the frequency band of the Wi-Fi Direct (simple AP) connected to
the printer. This can be set to 2.4 GHz or 5 GHz.
If the frequency band is changed, then all the connected devices will be
cut off. Connect them again.
If the frequency band is set to 5 GHz, then devices that do not support 5
GHz cannot be reconnected.
Restore Default Settings:
Returns all the Wi-Fi Direct (simple AP) settings to the factory defaults.
This also deletes the registered connection information, which is used by
Wi-Fi Direct functions of smart devices, stored on the printer.
iOS -
Other OS Devices -
Change Settings
Change
Network Name -
Change
Password -
Disable Wi-Fi
Direct -
Change
Frequency
Range 2.4GHz
*
5GHz
Restore Default
Settings -
Connection Check - Checks the status of the printer’s network connection and prints a
network connection diagnosis report. If there is a problem with the
connection, use the results of the diagnosis to resolve it.
Item Parameter Explanation