Making wi-fi settings from the printer, Connecting to devices other than, Connecting to devices other than ios using – Epson SureLab D1070 Professional Minilab Printer User Manual
Page 129
SL-D1000 Series User's Guide
Wireless LAN Connection
129
Connecting to Devices Other
Than iOS Using Wi-Fi Direct
This method allows you to connect the printer directly
to devices without a wireless router.
1
From the home screen, press the
u
/
d
/
l
/
r
buttons to select
Wi-Fi Setup
-
Wi-Fi Direct
.
2
Check the message, and then press the
Z
button.
3
Check the message, and then press the
Z
button.
4
Press the
l
button.
5
Use the
l
/
r
buttons to select
Other OS Devices
,
and then press the
Z
button.
6
Scroll the screen with the
d
button, and check
the connection information for Wi-Fi Direct.
7
On the smart device's Wi-Fi screen, select a
connection name shown on the printer's control
panel, and then enter the password.
8
Press the
Z
button on the printer.
9
Open the printing app you are using, and then
select the printer.
For smart devices that have been connected to
the printer before, select the network name
(SSID) on the smart device's Wi-Fi screen to
connect them again.
Making Wi-Fi Settings
from the Printer
You can make network settings from the printer's
control panel in several ways. Choose the connection
method that matches the environment and conditions
that you are using.
If you know the information for the access point such
as SSID and password, you can make settings
manually.
If you are using a wireless LAN router (access point)
that supports WPS, then you do auto settings by
pressing a button.
After connecting the printer to the network, connect to
the printer from the device that you want to use
(computer, smart device, tablet, and so on).
Related information
U
“Making Wi-Fi Settings by Entering the SSID and
U
“Making Wi-Fi Settings by Push Button Setup” on
U
“Making Wi-Fi Settings by PIN Code Setup
Making Wi-Fi Settings by
Entering the SSID and Password
You can set up a Wi-Fi network by entering the
information necessary to connect to a wireless router
from the printer's control panel. To set up using this
method, you need the SSID and password for a wireless
router.
Note:
O
If you are using Android, you may find it
convenient to do the settings from Epson Smart
Panel.
O
You only need to make these settings for the printer
and the device that you want to connect to once.
Unless you disable Wi-Fi Direct or restore the
network settings to their defaults, you do not need
to make these settings again.