Epson EpiqVision Ultra LS300 3600-Lumen Full HD Ultra-Short Throw Smart Laser 3LCD Projector (Black) User Manual
Page 33
33
2.
Connect the power cord to the projector's power inlet.
3.
Plug the power cord into an electrical outlet.
4.
Press the power button on the projector or remote control to turn on the projector.
The Status light flashes blue as the projector warms up. When the projector is warmed up, the
Status light stops flashing and turns blue.
Warning:
Never look into the projector lens when the laser is on. This can damage your eyes and is
especially dangerous for children and pets. If you are using the remote control to turn the projector
on, make sure no one is looking into the lens or in front of the projector before turning it on.
Caution:
Make sure no objects are blocking the light from the projector lens. Objects blocking the
lens for an extended time can melt, burn, or start a fire, and light that is reflected back into the lens
can cause the projector to malfunction. To stop projection, press the
Blank button or turn off the
projector (blanking the screen will not pause video content).
5.
Turn on the connected video source.
If you do not see a projected image right away, try the following:
• Turn on the connected computer or video device.
• Insert a DVD or other video media and press the play button, if necessary.
• Press the
Source Search button on the remote control and select the desired input.
• Change the screen output from the computer when using a laptop.
Parent topic: