Cleaning the obstacle and motion sensors – Epson EpiqVision Ultra LS300 3600-Lumen Full HD Ultra-Short Throw Smart Laser 3LCD Projector (Black) User Manual
Page 60
60
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the
projection window.
Warning:
Do not use a lens cleaner that contains flammable gas. The high heat generated by the
projector may cause a fire.
Caution:
Do not use canned air, or the gases may leave a flammable residue. Do not use glass
cleaner or any harsh materials to clean the projection window and do not subject the projection
window to any impacts or you may damage it.
Parent topic:
Related tasks
Cleaning the Obstacle and Motion Sensors
Clean the projector's obstacle and motion sensors glass (circled in red) periodically, or if you see a
message telling you to remove any obstacles that are interfering with the projection area.
• To remove dust or smudges, gently wipe the obstacle sensor glass with lens-cleaning paper.