Asus VY279HE 27" Eye Care Monitor (Black) - Manual (Page 32)

3-7 Chapter 3: General Instructions
• Trace Free : Speed up the response time by Over Drive
technology. The adjusting range is from lower 0 to faster 100.
• Aspect Control : Adjust the aspect ratio to “ Full ”, “ 4:3 ”, or
“ OverScan ”.
• 4:3 is only available when the input source is in 4:3 format.
• OverScan is only available for HDMI input.
• VividPixel : ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjusting range is from 0~100.
• ASCR : Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Motion Sync : Offer a more clear mode while displaying
motion pictures. Please note this function only works when the
refresh rate is 75Hz. It includes two modes: Normal Mode and
Advanced Mode, which can provide different effects.
• When this function is enabled, the system will automatically
reduce the brightness level.
• If the AMD FreeSync is enabled, the Motion Sync function is
grayed out.
• AMD FreeSync : Allows an AMD FreeSync supported graphics
source (HDMI to dynamically adjust display refresh rate based
on typical content frame rates for power efficient, virtually stutter
free and low-latency display update.
• If the Motion Sync is enabled, the AMD FreeSync function is
grayed out.
• Shadow Boost : Dark color enhancement adjusts the monitor
gamma curve to enrich the dark tones in an image making dark
scenes and objects much easier be found.
• Position : Adjust the horizontal position (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
• Focus : Reduce the Horizontal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100 (only available for VGA input).
• Auto Adjust. : Automatically perform Auto Adjust (only available
for VGA input).