Asus VA329HE 31.5" Eye Care Monitor - Manual (Page 12)

2-1 Chapter 2: Setup
2.1 Assembling the monitor base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Attach the base into the arm, making sure the tab on the arm fits into
the groove on the base.
3. Fix the base to the arm by rotating the screw until it fits into place.
• We recommend that you cover the table surface with soft cloth to
prevent damage to the monito.
• When assembling the base, be sure to tighten the screw to prevent
the monitor from shaking.
2.2 Detaching the arm/base (for VESA wall
mount)
The detachable arm/base of this monitor is specially designed for VESA
wall mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Remove the rubbers in the four screw holes. (Figure 1)
3. Remove the base (Figure 2).
4. Remove the hinge cover (Figure 3).
5. Use a screwdriver to remove the screw(s) on the hinge (Figure 4),
then remove the hinge.
• We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.