Asus 27" TUF Gaming 280 Hz Display - Manual (Page 20)

3-2 Chapter 3: General Instructions
3.1.2 OSD function introduction
1. Gaming
EXIT Back Enter
VG279QM1A 60Hz
ASUS TUF GAMING
50
1920x1080
DisplayPort
GameVisual
Racing Mode
Input Select HDR
OFF
Overclocking
Variable OD
Variable Refresh Rate
ELMB/ELMB SYNC
GamePlus
GameVisual
Shadow Boost
Gaming
Image
Color
Input Select
MyFavorite
• Overclocking :
* ON : This function allows you to adjust the refresh rate.
* Max Refresh Rate : Allows you to select a maximum refresh rate
of 280Hz (Only for DisplayPort input). After selecting, press the
( ) button to activate the setting.
Overclocking may cause screen flickering. To reduce such effects, disconnect
the DisplayPort cable and use the monitor OSD menu to try again with a safer
Max. Refresh rate.
• Variable OD : Improves the gray level response time of the LCD panel.
The adjusting range is from Level 0 to Level 5.
This function is not available when ELMB is enabled.
• Variable Refresh Rate: Allows a Variable Refresh Rate supported*
graphics source to dynamically adjust display refresh rate based on
typical content frame rates for power efficient, virtually stutter free and
low-latency display update.
• Variable Refresh Rate can only be activated within 48Hz~144Hz for
HDMI and 48Hz~240Hz for DisplayPort.
• For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
• ELMB/ELMB SYNC :