Dell UltraSharp 32" 6K HDR Video Conferencing Monitor User Manual
Page 92
92
| Operating the monitor
If either Thunderbolt (140W) / mDP / HDMI input is selected and the corresponding
cable is not connected, a floating dialog box as shown below appears.
No mDP Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U3224KB
or
No Thunderbolt(140W) Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U3224KB
or
No HDMI Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U3224KB
When the USB upstream cable is not connected, and you press the
Hookswitch/
Mute
button, the following message will appear:
This function is inactive
.
To enable, connect your PC to the USB upstream port on the monitor.
NOTE: For the Hookswitch/ Volume down/ Volume up/ Mute buttons to
work, you need to connect the USB upstream cable (Type-A to Type-C or
Thunderbolt
TM
4) from the PC to the monitor.
for more information.