Eizo FlexScan EV2456 24.1" 16:10 IPS Monitor - Manual (Page 18)

18
Chapter 3 Advanced Adjustment/Setting
3-2. Setting Menu Functions
●
Color Adjustment
The color mode setting status can be adjusted according to personal preference.
Functions that can be adjusted differ depending on the color mode.
√: Adjustable -: Not adjustable
Function
Color Mode
User1
User2
sRGB Paper Movie DICOM
Brightness √ √ √ √ -
Contrast √ - - √ -
Temperature √ - √ √ -
Gamma √ - - - -
Advanced
Settings
Overdrive √ - - - -
Hue √ - - √ -
Saturation √ - - √ -
Gain √ - - - -
Reset √ √ √ √ -
Attention
• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after power to the monitor has been turned on before adjusting the monitor.
• The same image may be observed in different colors on multiple monitors due to monitor-specific
characteristics. Make fine color adjustments visually when matching colors across multiple monitors.
Function Setting Range Description
Color Mode User1
User2
sRGB
Paper
Movie
DICOM
Select the desired mode according to the monitor
application.
The color setting status can also be adjusted according to
personal preference. Select the mode for adjustment and
perform adjustment using the relevant functions.
Note
• For details on the adjustment status of each mode, see
“2-3. Switching Display Modes (Color Modes)” (page
13) .
Brightness 0 to 100 The screen brightness is adjusted by changing the
brightness of the backlight (light source from the LCD back
panel).
Note
• If the image is too dark even when the brightness is set
to 100, adjust the contrast.