Eizo FlexScan EV2456 24.1" 16:10 IPS Monitor - Manual (Page 38)

38
Chapter 6 Reference
6-5. Making Use of USB (Universal Serial Bus)
This monitor is equipped with a USB hub. It functions as a USB hub when connected to a USB-
compatible PC, allowing the connection of peripheral USB devices.
Note
• This product supports USB 3.0. When connecting to peripheral devices that support USB 3.0, high-speed data
communication is possible (however, only when the USB cable used to connect the PC and peripheral device is
USB 3.0 compliant).
●
Required System Environment
• A PC equipped with a USB port
• USB cable
Attention
• This monitor may not work depending on the PC, OS, or peripheral devices to be used. For USB
compatibility of peripheral devices, contact their manufacturers.
• Even when the monitor is in power saving mode, devices connected to the USB downstream port will still
work. Therefore, power consumption of the monitor varies with connected devices even in power saving
mode.
• When the main power of the monitor is off, a device connected to the USB downstream port will not operate.
●
Connection Procedure (Setup of USB Function)
1. Connect the monitor first to a PC using the signal cable, and start the PC.
2. Connect the USB cable between the USB downstream port of the PC and the USB upstream port
of the monitor.
The USB hub function is set up automatically upon connection of the USB cable.
3. Connect a peripheral USB device to the USB downstream port of the monitor.
USB
downstream
port
USB upstream
port