Lenovo 24.5" Y25-30 280 Hz Gaming Monitor User Manual
Page 11
Chapter 1.Getting started 1-6
8
.
Plug the monitor power cord and the computer cord into grounded electrical outlets.
Note:
A certified power supply cord has to be used with this equipment. The
relevant
national installation and or equipment regulations shall be considered. A
certified
power supply cord not lighter than ordinary polyvinyl chloride flexible cord
according to IEC 6022
7
(designation H05VV-F 3G 0.75mm
2
or H05VVH2-F2
3G0.75mm
2
) shall be used. Alternative a flexible cord be of synthetic rubber
according to IEC 60245 (designation H05RR-F 3G 0.75mm
2
) shall be used.
7
. Connect one end of the USB cable to the USB downstream terminal on the side of the
monitor, and connect the other end of the USB cable to an appropriate USB port on your
device.
Note: The USB downstream port does not provide power while the monitor switch is
off.
*: Depending on many factors such as the processing capability of peripheral devices, file
attributes, and other factors related to system configuration and operating environments,
the actual transfer rate using the various USB connectors on this device will vary and is
typically slower than the data rates as defined by the respective USB specifications: - 5
Gbit/s for USB 3.1 Gen 1; 10 Gbit/s for USB 3.1 Gen 2 & 20 Gbit/s for USB 3.2.