Philips 498P9Z 48.8" 1440p HDR Curved Monitor - Manual (Page 33)

31
7. Troubleshooting & FAQs
  
Q14: Why My DVD player, blue ray
player…etc. shows dark screen
after connecting to HDMI port of
this computer?
Ans.:
1. Press the customized “USER”
hotkey. (The default setting
of this hotkey is “HDMI EDID
Switch”) then select “2”. You will
now be able to see the content
on the screen.
2. If the “User Key” hotkey has
already been assigned for other
functions, then in that case
please:
Change to another source first,
go to OSD menu to change the
setting to “2” of ” HDMI EDID
Switch “ function.
Then change the source back
to HDMI.
Q15: Where can I find Regulation
& Service Information Manual
mentioned in EDFU?
Ans.: Regulation & Service Information
Manual can be download on the
Philips website support page.
7.3 Multiview FAQs
Q1: How to listen to Audio,
independent of video?
Ans.: Normally the audio source is
linked to the main picture source.
If you want to change audio-
source input (for example: listen
to your MP3 player independently
regardless of the video source
input), you can press
to enter
OSD menu. Select your preferred
[Audio Source] option from the
[Audio] main menu.
Please note that the next time
you turn on your Display, the
Display will by default select the
audio source you chose last time.
In case you want to change it
again, you need to go through the
above steps to select your new
preferred audio source, which
then will become the “default”
mode.
Q2: Why the sub-windows flickers
when I enable PBP.
Ans: It’s because the sub-windows
video source is interlace timing(
i-timing), please change sub-
window signal source to be
progressive timing( P-timing).