Philips 498P9Z 48.8" 1440p HDR Curved Monitor - Manual (Page 7)

5
2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
1 Package contents
498P9
Register your product and get support at www.philips.com/welcome
Quick
Start
Power
* HDMI
* DP
*USB A-B
*Different according to region.
*Battery: Zinc carbon AAA · R03 1.5V
2 Install the base
1. In order to well protect this monitor
and avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
2. Hold the neck with both hands.
(1) Gently attach the neck to the
VESA mount area until the latch
locks the neck.
(2) Use a screwdriver to tighten the
assembly screws , and secure the
neck to the monitor tightly.
1
2
3. After attaching the base, erect the
monitor with both hands on holding
the monitor together with styrofoam
firmly. Now you can pull out the
styrofoam. Notice this monitor is
curved design, when you pull out
styrofoam, do not squeeze the
panel to avoid broken panel.
1
2
Warning
This product is curve design, when
attach / detach the base, place the
protective material under the monitor
and do not press down the monitor to
avoid the damage.