Philips 7000 Series 27" 4K HDR Monitor - Manual (Page 7)

5
2. Setting up the monitor
2.1 Installation
1 Package contents
*DP
VESA Bracket
*HDMI AC/DC Adapter
Screw
M4 x 4
*USB C-C *USB C-A *USB C-C/A
Quick start
Register your product and get support at www.philips.com/welcome
27E2F7901
Monitor
7000 Series
*Different according to region.
Note
Use only the AC/DC adapter model:
FSP180-AJBN3-T
2 Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of
the base.
(3) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
1
2
3
3. After stand installation, hold the
stand with both hands, then lift the
monitor.