Philips 7000 Series 27" 4K HDR Monitor - Manual (Page 9)

7
powered ON at all times to be able to
use this function.
Some select Philips monitors may not
Power or Charge your device when it
enters to “Sleep/Standby” mode (White
power LED blinking). In that case, please
enter to OSD Menu and select “USB
Standby Mode”, then, turn the function
to “ON” mode (default=OFF). This will
then keep the USB power and charging
functions active even when the monitor
is in sleep/Standby mode.
 
  





 
 

Note
If you Turn OFF your monitor via the
power switch at any given time, all the
USB ports will power OFF.
Warning
USB 2.4Ghz wireless devices, such
as, wireless mouse, keyboard, and
headphones, maybe have interference
by the high-speed signal of USB3.2
devices, which may result in a decreased
efficiency of the radio transmission.
Should this happen, please try the
following methods to help reduce the
effects of interference.
• Try to keep USB2.0 receivers away
from USB3.2 connection port.
• Use a standard USB extension cable
or USB hub to increase the space
between your wireless receiver and
the USB3.2 connection port.
2.2 Operating the monitor
1 Description of the control buttons
Press to switch power on.
Press more than 3 seconds to
switch power off.
Access the OSD menu.
Confirm the OSD adjustment.
Adjust the Color Space.
Adjust the OSD menu.
Change the signal input
source.
Adjust the OSD menu.
SmartImage Game
menu. There are multiple
selections: EasyRead, Office,
Photo, Movie, Game,
Economy, LowBlue Mode,
SmartUniformity, D-Mode,
Off.
When the monitor receives
HDR signal, SmartImage
will show HDR menu. There
are multiple selections: HDR
HLG, HDR Vivid, HDR Movie,
DisplayHDR 400, Personal,
Off.
Return to previous OSD level
.