Impact VC-500WLN-II 500Ws Digital Monolight - Manual (Page 15)

15
Press the output adjustment dial repeatedly to cycle through the modeling light’s
three operating modes:
• In proportional mode, use the adjustment
dial to increase or decrease the flash power.
The modeling light brightness will increase or
decrease incrementally with the flash power.
• In free mode, use the and buttons to adjust
the modeling light brightness independently of
the flash output power. Each button press will
change the power output of the modeling light
by 0.1 increments. Press and hold the or
buttons to rapidly increase or decrease the
value.
• Off mode turns the modeling light off. No modeling light icons appear
onscreen.
The modeling light can be used as a recycle indicator. When the audio function
is deactivated (see
Audio Button on page 18), the modeling light will turn off
when the flash is fired, and it will turn on again to indicate that the capacitors
have recharged. When the audio function is active, the modeling light will not
turn off when the flash is fired.