Impact VC-500WLN-II 500Ws Digital Monolight - Manual (Page 24)

24
Replacing the Fuse
The Impact Digital Monolight comes with two fuses: one installed and one spare.
Both are located within the fuse bay. To remove the fuse housing from the fuse
bay and replace the fuse, use the following instructions:
1. Ensure the monolight is powered off and
unplugged.
2. Insert a slotted screwdriver into the nook on the
flat side of the AC jack, and gently pry out the
fuse housing.
3. The fuse located within the housing is the one
the monolight is using when it is powered on. To
replace the fuse, remove it from the box.
4. Replace it with the included spare.
5. Reattach the fuse holder to the fuse bay to
complete the process.